The hot air goes through the material from up to lower or bottom-up, with high speed, high pressure and even distribution, the contacting area between the material and hot air is enlarged, and the drying speed gets improved. The heat source is gas indirect furnace. The hot air box is below the recycle fan. There are hot air distributing pipe outside the chamber, so that the hot air can sprayed evenly from the retaining plate, the advantages of this structure are: The drying temp is easy to be controlled, which is significant for various material drying process; The hot air is sprayed through retaining plate, which made the temperature evenly and can avoid partial high temperature No maintenance for hot air box, the hot air box is inner set and outside preservation, which can minimize heat loss There are air filter for the exhaust fan, frequently cleaning can avoid miscellany and pollution. The dehumidifying fan is above the feeding device, which is used for discharging the used high-moisture and low-temp air. The hot air is recycling from discharging section to feeding section, so as to save energy effectively. The whole equipment is full weld to avoid wind channeling. There is no leaking during cleaning, which can ensure the quality of final product. Fully-closed model is available, to make sure that the product will not be polluted and heat is high efficient. The access door makes the maintain and cleaning work convenient The DW is a energy-saving belt dryer. The air distribution is more even, hot air speed is higher, penetrating is effective, drying is more strength. This system is inner recycle type; primary selection is DW3-2-25, including 12 drying units, for each section, there is thermal resistance automatic control independent and with digital show. All key components are provided by famous manufacturer, which can ensure long-term operation of the equipment. The belt speed can be electromagnetic adjusted, and the adjust range is large, besides, the speed can be directly displayed on the control cabinet screen, so that the final moisture can be controlled effectively. Primary and Middle Filter can ensure the clean air inlet All recycle fans are centrifugal, which are low consumption, high pressure and high penetration rate.
English 
